PAM-Modes • G.SHDSL devices use two parameters for line configuration: PAM and BASE RATE. While G.SHDSL Economy and Etherlink II modems only know two PAM modes (16 and 32), Etherlink IV works with PAM modes from 4 to 128. Although the PAM mo...
Attenuators • Attenuators • Attenuators filter strength of fibre optic signal • Attenuators are used with single-mode fibre optic devices and cable to filter the strength of the fibre optic signal. Depending on the type of attenuator attached ...
Fibre Channel Technology • Fibre Channel Technology • What is Fibre Channel? • Fibre Channel is a set of communication standards designed to provide high-speed data transfer over a duplex, serial interface. It’s an open standard that supports ...
Attenuators. • Attenuators • Attenuators filter strength of fibre optic signal • Attenuators are used with single-mode fibre optic devices and cable to filter the strength of the fibre optic signal. Depending on the type of attenuator attached...
Fibre Channel Technology. • Fibre Channel Technology • What is Fibre Channel? • Fibre Channel is a set of communication standards designed to provide high-speed data transfer over a duplex, serial interface. It’s an open standard that supports...
Component vs. channel testing. • Component vs. channel testing • Channel Testing • When using a Category 6 system, the full specification includes the testing of each part individually and in an end-to-end-channel. Because CAT6 is an open stan...